QR K82 is a flange seal profile specially designed for static sealing of SAE flanges.
Used in SAE type of flanges and valve blocks
Easy to assemble with the hand. The surface of the flanges must be clean. Before mounting the seal must be oiled with system olie.Groove Surface
|MATERIAL: PU 95 SH|
|MEDIA||Mineral oils (DIN 51524)||HFA and HFB||HFC|
|TEMPERATURE||-30°C +100°C||+5°C +50°C||-30°C +40°C|
|PRESSURE||≤600 Bar||≤600 Bar||≤600 Bar|
Note: The above data are maximum values and cannot be used at the same time.
|Sliding Surface||≤0.4 µm||≤6.3 μm|
|Groove Surface||≤3.0 µm||≤25 µm|
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00