DBM L26 is a three piece double acting compact seal which consists of one fabric reinforced elastomeric sealing element and two thermoplastic guide back-up rings
Mining equipment , iron and steel industry , marine hydraulics and earth moving equipment.
DBM profile L26 is designed for installation in open or closed grooves. We recommend the open groove design for pistons that are smaller than Ø 50 mm. It is important that the assembly tool has to be soft material, and no sharp edges. For the installation of the seal element needs to be lubricated with oil system.
For special applications that require high temperatures , our DBM L26 is being manufactured with reinforced cotton fabric with FPM and special mixture of PTFE guide back-up rings.
MATERIAL: POM / COTTON FABRIC / NBR 80 SH
|MEDIA||Mineral oils(DIN 51524)||HFA and HFB||HFC|
|TEMPERATURE||-30°C +105°C||+5°C +60°C||-30°C +60°C|
|PRESSURE||≤400 Bar||≤400 Bar||≤400 Bar|
|SPEED||≤0.5 m/sn||≤0.5 m/sn||≤0.5 m/sn|
Note: The above data are maximum values and cannot be used at the same time.
|Sliding Surface ØD||≤0.4 μm||≤3.2 μm|
|Groove Base Ød||≤1.6 μm||≤6.3 μm|
|Groove Flanks B||≤3.2 μm||≤16 μm|
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00