TETE is a double acting complete piston seal which consists of a steel plate vulcanized with elastomeric nitrile rubber using special production methods. The sealing lips do have Stainless steel springs in order to increase the preload.
Short stroke , low pressure hydraulic cylinder and special pneumatic cylinders.
TETE is on the piston rod with wire put fixed with a nut. The nut must be secured. The sliding surface and the cylinder bore is coated with oil that does not come with the shut-off element in the reaction. Take special precautions at the end of the stroke to prevent damage to the sealing lips.
For special applications that require high temperatures , TETE can be produced in FPM material
|MATERIAL: STEEL / NBR 90 SH / STAINLESS STEEL SPRING|
|MEDIA||Mineral oils (DIN 51524)||HFA and HFB||HFC|
|TEMPERATURE||-30°C +105°C||+5°C +60°C||-30°C +60°C|
|PRESSURE Ø 20 MM||60 Bar||60 Bar||60 Bar|
|PRESSURE Ø 40 MM||40 Bar||40 Bar||40 Bar|
|PRESSURE Ø 60 MM||30 Bar||30 Bar||30 Bar|
|PRESSURE Ø 80 MM||25 Bar||25 Bar||25 Bar|
|PRESSURE Ø 100 MM||20 Bar||20 Bar||20 Bar|
|PRESSURE Ø 120 MM||15 Bar||15 Bar||15 Bar|
|PRESSURE Ø 140 MM||12 Bar||12 Bar||12 Bar|
|PRESSURE > Ø 140 MM||10 Bar||10 Bar||10 Bar|
|PRESSURE||≤0.5 m/sn||≤0.5 m/sn||≤0.5 m/sn|
Note: The above data are maximum values and cannot be used at the same time.
|Sliding Surface ØD||≤0.2 μm||≤2.0 μm|
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00