SB is a single action wiper ensuring that foreign particles do not penetrate into the hydraulic systems, avoiding wear and damage to all the internal components including seals.
Light and medium duty construction machinery, forklift-trucks, agricultural machinery,support cylinders and standard cylinders.
Wiper is pressed into axially open housings. Special equipment should be used during this process. It is very importent that assembly tools must be soft material and have no sharp edges. Before installation the wiper must be oiled with system oil.
NOTE: SB wipers are single action and can be used with combination of all rod sealing elements. SB wipers can be produced on request in steel/fpm for special applications thatrequire hight temperatures.
|MATERIAL: STEEL / NBR 90 SH|
|MEDIA||Mineral oils(DIN 51524)||HFA and HFB||HFC|
|TEMPERATURE||30°C +105°C||+5°C +60°C||-30°C +60°C|
|SPEED||≤1.0 m/sn||≤1.0 m/sn||≤1.0 m/sn|
Note: The above data are maximum values and cannot be used at the same time.
|Sliding Surface Ød||≤0.4 μm||≤3.2 μm|
|Groove Base ØD||≤1.6 μm||≤10 μm|
|Groove Flanks S1||≤3.2 μm||≤16 μm|
Note: It is recommended to have 50% to 90% of the working surface material contact area value
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00