DUO-K is a double acting pneumatic piston seal designed to work in low axial housing heights.
Short stroke pneumatic cylinders and valves.
DUO-K can be snapped by hand into the housing grooves provided. In case of using an assembly tool make sure that it is of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil. Special lubrication should be used on the sliding surface in case of having dried media.
NOTES: For special applications that require high temperatures , DUO-K can be produced in FPM material.
|MATERIAL: NBR 70 SH|
|MEDIA||Prepared , dried and de-oiled compressed air|
|TEMPERATURE||-30°C +105 °C|
Note: The above data are maximum values and cannot be usedat the same time.
|Sliding Surface ØD||≤4 μm|
|Groove Base Ød||≤10 µm|
|Groove Flanks B||≤15 µm|
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00