CUSHIONSEAL PU is a pneumatic seal with special design spacer lug and flow passages to cushion at the end of the stroke in pneumatic cylinders.
It can be assembled into closed groove by hand. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil
|MATERIAL: PU 92 SH|
|MEDIA||Prepared , dried and de-oiled compressed air|
|TEMPERATURE||-30°C +80 °C|
|SPEED||≤ 1.0 m/s|
Note: The above data are maximum values and cannot be used at the same time
|Sliding Surface Ød||≤ 4 µm|
|Groove Base ØD||≤ 10 µm|
|Groove Flanks||≤ 15|
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00