NISG E9 (COMBI ROD WIPER) PNEUMATIC

product

NISG E9 is double-acting combination of groove and wiper ring cuff together consisting of vulcanized nbr rubber to steel.

PRODUCT ADVANTAGES

  • Superior sealing effect
  • Superior wiping effect
  • Low dynamic friction
  • Wide range of dimensions.
  • Double lip makes additional protection to prevent the particles to enter into the cylinder
  • Able to work in hard conditions
  • Good adjustment to temperature changes due to the metal ring

APPLICATION:

Pneumatic cylinders.

INSTALLATION:

NISG E9 wiper/seal is fitted into the housing by means of a circlip recess. The sealing part is pushed in and fixed by the circlip. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil. 

NOTES: For special applications that require high temperatures , NISG E9 can be produced in FPM material.

 MATERIAL: STEEL / NBR 70 SH

OPERATING CONDITIONS
MEDIA Prepared , Conditioned dry compressed air
TEMPERATURE -30°C +105 °C
PRESSURE ≤16 Bar
SPEED ≤ 1.0 m/s

Note: The above data are maximum values and cannot be used at the same time

 

SURFACE ROUGHNESS Rmax
Sliding Surface  Ød ≤ 4 µm
Groove Base ØD2 ≤ 10 µm
Groove Flanks S1 ≤ 15

Note: It is recommended to have 50% to 90% of the working surface material contact area value

 

  

Loading... please wait
# Vota code Name Application Material Pressure
(bar)
Temperature °C Sliding Speed (m/s)
stang-afstrijker/nisg-e9-pneumatic NISG E9 PNEUMATIC NISG E9 (COMBI ROD WIPER) PNEUMATIC ROD/AXLE NBR-STAAL 16 -30°C +105°C 1.0
FPM-STAAL 16 -20°C +200°C 1.0
Find product

CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00

# Description Info Stock Price
{{product.number}} {{product.description}} {{product.item_type_name.substring(0, 5)}} {{product.stock}} {{product.price|customCurrency:"€":",":".":2}}