VNISO is a double-acting pneumatic rod seal and scraper combination that ensures that no dirt can come from outside the system, prevents damage to all components including seals.
Compact and special small cylinders and Pneumatic cylinders.
It can be assembled into closed groove with tight hand force. VNISO does not need additional element such as circlip for axial fitting within the housing. We recommend using special assembly tool. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the VNISO must be oiled with system oil.
|MATERIAL: PU 92 SH|
|OPERATING CONDITIONS PU 92 SH|
|MEDIA||Prepared , dried and de-oiled compressed air|
|TEMPERATURE||-30°C +80 °C|
|SPEED||≤ 1.0 m/s|
Note: The above data are maximum values and cannot be used at the same time
|Sliding Surface Ød||≤ 4 µm|
|Groove Base ØD||≤ 10 µm|
|Groove Flanks||≤ 15|
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00