Rotary shaft seal in standard design with a metal outer surface and a spring-energised sealing lip made of elastomer. In addition, the standard model is available with a protective lip (B1SL) on the air side.
Sealing of rotating machine elements such as shafts, hubs and axles.
The B1SL is a single-action rotary shaft seal for rotating or pivoting shafts with optional protective lip sealing action (B1SL) on the side facing away from the medium, against dirt accumulation from the outside. Tight and accurate fitting is achieved by the metal outer surface. The B1SL model has limited sealing action with thin fluid or gaseous media and with split housings. To guarantee a high degree of static sealing on the outer surface, better surface treatment of the housing bore is required or an additional coat of paint should be applied to the outer surface.
Good chemical resistance to many mineral oils and greases.
|Operational application limits|
|Pressure||≤ 0.05/0.5 (Mpa/bar)|
|Temperature||-40°C to +100°C|
|Peripheral speed||≤ 12 (m/s)|
Suitable tools should be used for installation. It is recommended that the installation housing is designed to provide the rotary shaft seal with axial support.
The nominal widths mentioned on the following pages represent the standard dimensions. They are generally in stock or can be delivered at short notice.
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00