DSM (DOUBLE ACTION PISTON SEALMASTER HD)

product

DSM is a five piece double acting compact seal which consists of one multiple lipped elastomeric nitrile rubber sealing element , two polyester elastomer back-up rings on both sides to prevent extrusion into the sealing gap and two special profiled thermoplastic guide rings to absorb transverse forces.

PRODUCT ADVANTAGES:

  • Effective sealing during vibration and shock loading
  • Superior sealing efeect in high pressures
  • Maximum sealing effciency with the least amount of friction
  • Superior sealing performance

APPLICATION:

Heavy duty cylinders , excavators , cranes , marine hydraulics and loading platforms.

INSTALLATION:

DSM compact seal must be used in open housing due to the non split form of the back-up ring produced from TPE material. If it is necessary to have a closed groove , back-up rings should be cut with 45° angle in a way not to have any gap and installed afterwards. On this case after the assembly onto the piston the cut on the back-up ring should be checked carefully. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.

NOTES: For special applications that require high temperatures , DSM piston seal is manufactured in FPM and PTFE material.

MATERIAL: TPE 5501 / NBR 80 SH / POM

 

OPERATING CONDITIONS 
MEDIA Mineral oils(DIN 51524)  HFA and HFB HFC
TEMPERATURE -30°C +105°C +5°C +60°C -30°C +60°C
PRESSURE ≤700 Bar ≤700 Bar ≤700 Bar
SPEED ≤0.5 m/sn ≤0.5 m/sn ≤0.5 m/sn

 Note:The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS Ra Rmax
Sliding Surface ØD ≤0.4 μm ≤4.0 μm
Groove Base Ød ≤1.6 μm ≤6.3 μm
Groove Flanks B ≤3.2 μm ≤16 μm

 Note: It is recommended to have 50% to 90% of the working surface material contact area value.

 

 

 

 

 

 

 

  

 

 

 

Loading... please wait
# Vota code Name Application Material Pressure
(bar)
Temperature °C Sliding Speed (m/s)
hydraulic-seals-piston-seal/dsm DSM DSM (DOUBLE ACTION PISTON SEALMASTER HD) PISTON TPE-NBR-POM 700 -30°C +105°C 0.5
Find product

CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00

# Description Info Stock Price Add to cart
{{product.number}} {{product.description}} {{product.item_type_name.substring(0, 5)}} {{product.stock}} {{product.price|customCurrency:"€":",":".":2}}