K86 (COVERSEAL OUTSIDE)

product

COVERSEAL K86 is a static outside sealing element designed to replace O-ring + back up ring combination

PRODUCT ADVANTAGES

  • High operating pressures
  • Interchangeable for o-ring and o-ring with back-up ring
  • Can work under severe conditions
  • No need for additional back-up ring
  • High wear resistant
  • No twisting on assembly

APPLICATION

All hydraulic applications in which O-rings are used.

INSTALLATION:

COVERSEAL K86  is assembled by hand, If using assembly tool the mounting area should not have any sharp edges. Before mounting the COVERSEAL must be lubricated with oil system. must be lubricated with oil system.

Note: COVERSEAL K86 is a double acting cover seal for outer sealing. The diffculties faced during an o-ring assembly such as twisting , ripping was solved with this design.

MATERIAL: PU 92 SH

 

OPERATING CONDITIONS
MEDIA Mineral oils (DIN 51524)  HFA and HFB HFC
TEMPERATURE -45°C +100°C +5°C +50°C 30°C +40°C
PRESSURE ≤500 Bar ≤500 Bar ≤500 Bar

Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS Ra Rmax
Sliding Surface ØD ≤0.8 µm ≤3.2 μm
Groove Base Ød ≤1.6 µm ≤6.3 µm
Groove Flanks  B ≤6.3 µm ≤16 µm

Note: It is recommended to have 50% to 90% of the working surface material contact area value.

Loading... please wait
# Vota code Name Application Material Pressure
(bar)
Temperature °C Sliding Speed (m/s)
coverseal-static/coverseal-k86-od COVERSEAL K86 OD K86 (COVERSEAL OUTSIDE) STATIC PU 500 -30°C +100°C
Find product

CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00

# Description Info Stock Price Add to cart
{{product.number}} {{product.description}} {{product.item_type_name.substring(0, 5)}} {{product.stock}} {{product.price|customCurrency:"€":",":".":2}}