Products

VNI/L+LI+XR (U-RING SINGLE ACTION RODSEAL)

product

VNI-L+LI+XR is a two-part, single-acting rod seal consisting of a PU sealing element, as well as profile and anti-extrusion ring for better sealing effect

PRODUCT ADVANTAGES

  • ​Excellent barrier properties and with the second sealing lip anti extrusion ring and a nbr profielring
  • Excellent barrier properties at low pressures
  • High abrasion resistance
  • Extra lip ensures that the seal does not stick to the rod.
  • High gap bridging by anti extrusion ring

APPLICATION:

Mining equipment , iron and steel industry , metal injection machines , scrap cutters , marine hydraulics , cranes and mobile hydraulics.

INSTALLATION:

Easy to assemble in a closed groove, depending on the minimum diameter values indicated in the table below. If the diameter values outside this table, we recommend an open groove. If'm assembly tools are used the mounting area should not have any sharp edges. Before mounting the VNI-L+LI+XR must be lubricated with oil system

MINUMUM DIAMETER VALUES FOR CLOSED TYPE OF GROOVES
(D-d) /2 (mm) 4 5 6 7.7 10 12.5 15
dmin (mm) 25 30 40 50 80 100 105

Note: the permissible sealing gap values of VNI-L+LI+XR rod seal is given in the below table.

PERMISSIBLE SEALING GAP   Smax (mm)
t=(D-d)/2 150 Bar 250 Bar 400 Bar 630 Bar
  1.0 0.8 0.6 0.4

Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers. 

MATERIAL: PU 94 SH / POM / NBR

 

OPERATING CONDITIONS
MEDIA Mineral oils(DIN 51524)  HFA and HFB HFC
TEMPERATURE -30°C +100°C +5°C +50°C -30°C +40°C
PRESSURE ≤400 Bar ≤400 Bar ≤400 Bar
SPEED ≤0.5 m/sn ≤0.5 m/sn ≤0.5 m/sn

Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS Ra Rmax
Sliding Surface ØD-Ød ≤0.4 μm ≤3.2 μm
Groove Base ØDb-Ødp ≤1.6 μm ≤10 μm
Groove Flanks B ≤3.2 μm ≤16 μm

Note: It is recommended to have 50% to 90% of the working surface material contact area value.

 

GROOVE DIMENSIONS LIST FOR ASSEMBLY VNI-L+LI+XR

VOTA NR.  CODE    KASTAŞ NO d (f8) D(H11) b B(-0/+0,2) n
607287 VNI L+LI+XR  K31-025 PU 25 35 7,3 8,3 4
6090015 VNI L+LI+XR  K31-030/1 30 40 7,3 8,3 4
609046 VNI L+LI+XR  K31-030 PU 30 40 10 11 4
609587 VNI L+LI+XR  K31-031 PU 31,75 38,1 6,35 7,35 3
609599 VNI L+LI+XR  K31-031/1 31,75 41,28 6,35 7,35 5
610965 VNI L+LI+XR  K31-035 PU 35 50 9,52 10,5 5
6117921 VNI L+LI+XR  K31-038 PU 38,1 47,63 6,35 7,35 5
611846 VNI L+LI+XR  K31-038/1PU 38,1 50,8 9,52 10,5 5
6123085 VNI L+LI+XR  K31-040/1 PU 40 50 7,3 8,3 4
612460 VNI L+LI+XR  K31-040/3 PU 40 52 8,6 9,5 4,5
612515 VNI L+LI+XR  K31-040 PU 40 55 9,5 10,5 5
6125875 VNI L+LI+XR  K31-040/2 PU 40 55 11,4 12,4 5
613541 VNI L+LI+XR  K31-044 PU 44,45 57,15 9,52 10,5 4,5
6140555 VNI L+LI+XR  K31-045 PU 45 60 11,4 12,4 5
6150066 VNI L+LI+XR  K31-050/3 PU 50 60 7,3 8,3 4
6152575 VNI L+LI+XR  K31-050 PU 50 65 11,4 12,4 5
615710 VNI L+LI+XR  K31-050/1 PU 50,8 60,32 9,52 10,5 4
615770 VNI L+LI+XR  K31-050/2 PU 50,8 63,5 9,52 10,5 4,5
616670 VNI L+LI+XR  K31-055/1 PU 55 68 13 14 4,5
616752 VNI L+LI+XR  K31-055 PU 55 70 11,4 12,4 5
617280 VNI L+LI+XR  K31-057 PU 57,15 69,85 9,52 10,5 4,5
VOTA NR.  CODE    KASTAŞ NO d (f8) D(H11) b B(-0/+0,2) n
617713 VNI L+LI+XR  K31-060/2 60 72 8,6 9,6 4.5
6177606 VNI L+LI+XR  K31-060/1 PU 60 73 13 14 4,5
617781 VNI L+LI+XR  K31-060 PU 60 75 11,4 12,4 5
6184005 VNI L+LI+XR  K31-063/1 63 75 8,6 9,6 4,5
6186059 VNI L+LI+XR  K31-063 PU 63,5 76,2 9,52 10,5 4,5
618986 VNI L+LI+XR  K31-065 PU 65 78 10 11 4,5
6190008 VNI L+LI+XR  K31-065/1 PU 65 80 9 10 5
619643 VNI L+LI+XR  K31-069 PU 69,85 82,55 9,52 10,5 4,5
6198935 VNI L+LI+XR  K31-070/3 PU 70 80 12 13 4
619925 VNI L+LI+XR  K31-070/5 70 82 8,6 9,6 4.5
619975 VNI L+LI+XR  K31-070/1 PU 70 83 10 11 4,5
620009 VNI L+LI+XR  K31-070/2 PU 70 85 9 10 5
620019 VNI L+LI+XR  K31-070/4 PU 70 85 10 11 5
620029 VNI L+LI+XR  K31-070 PU 70 85 11,4 12,4 5
6206225 VNI L+LI+XR  K31-075 PU 75 88 10 11 4,5
620644 VNI L+LI+XR  K31-075/1 PU 75 90 9 10 5
621042 VNI L+LI+XR  K31-076/2 PU 76,2 88,9 9,52 10,5 4,5
621071 VNI L+LI+XR  K31-076 PU 76,2 92,7 12,7 13,7 5,5
621462 VNI L+LI+XR  K31-080/1 PU 80 93 10 11 4,5
6214755 VNI L+LI+XR  K31-080/2 PU 80 95 9 10 5
6214769 VNI L+LI+XR  K31-080 PU 80 95 11,4 12,4 5
621968 VNI L+LI+XR  K31-082 PU 82,55 95,25 9,52 10,52 4,5
VOTA NR.  CODE    KASTAŞ NO d (f8) D(H11) b B(-0/+0,2) n
6222205 VNI L+LI+XR  K31-085/2 85 97 8,6 9,6 4.5
6222528 VNI L+LI+XR  K31-085 PU 85 100 10 11 5
622429 VNI L+LI+XR  K31-085/1 PU 85 105 15 16 6
622763 VNI L+LI+XR  K31-088 PU 88,9 101,6 9,52 10,5 4,5
622785 VNI L+LI+XR  K31-088/1 PU 88,9 104,77 12,7 13,7 5,5
623022 VNI L+LI+XR  K31-090/4 PU 90 100 12 13 4
623090 VNI L+LI+XR  K31-090/1 PU 90 105 10 11 5
623095 VNI L+LI+XR  K31-090 PU 90 105 11,4 12,4 5
6231078 VNI L+LI+XR  K31-090/5 90 105 15 1 5
623220 VNI L+LI+XR  K31-090/3 PU 90 110 14,5 14,5 6
623260 VNI L+LI+XR  K31-090/2 PU 90 110 17 18 6
6236865 VNI L+LI+XR  K31-095 PU 95 110 10 11 5
623812 VNI L+LI+XR  K31-095/1 PU 95 115 15 16 6
624381 VNI L+LI+XR  K31-100/1 PU 100 115 10 11 5
624421 VNI L+LI+XR  K31-100/4 100 115 15 16 5
6245143 VNI L+LI+XR  K31-100/2 100 120 14 15 6
624515 VNI L+LI+XR  K31-100 PU 100 120 14,5 15,5 6
624869 VNI L+LI+XR  K31-101 PU 101,6 114,3 14,28 15,28 4,5
624884 VNI L+LI+XR  K31-101/1PU 101,6 117,47 14,37 15,37 5,5
6251478 VNI L+LI+XR  K31-105 PU 105 120 12 13 5
625150 VNI L+LI+A  K31-105/2 105 120 14,5 15,5 5
6252097 VNI L+LI+XR  K31-105/1 105 125 14,5 15,5 6
625334 VNI L+LI+XR  K31-107 107,95 120,65 13,6 14,6 4,5
VOTA NR.  CODE    KASTAŞ NO d (f8) D(H11) b B(-0/+0,2) n
625503 VNI L+LI+XR  K31-110/1 PU 110 125 12 13 5
625547 VNI L+LI+XR  K31-110 PU 110 130 12 13 6
625580 VNI L+LI+XR  K31-110/2 PU 110 130 14,5 15,5 6
62590872 VNI L+LI+XR  K31-114 PU 114,3 127 14,28 15,28 4,5
625932 VNI L+LI+XR  K31-114/1 PU 114,3 133,35 15,87 17 6
626105 VNI L+LI+XR  K31-115/1 115 130 15 16 5
6261485 VNI L+LI+XR  K31-115 PU 115 135 14,5 15,5 6
626487 VNI L+LI+XR  K31-120 PU 120 140 12 13 6
626835 VNI L+LI+XR  K31-125 PU 125 145 14,5 15,5 6
627163 VNI L+LI+XR  K31-127 PU 127 146,05 15,87 17 6
627320 VNI L+LI+XR  K31-130 PU 130 150 14,5 15,5 6
627635 VNI L+LI+XR  K31-135PU 135 155 13,6 14,6 6
6277885 VNI L+LI+XR  K31-139 PU 139,7 152,4 14,28 15,28 4,5
6279705 VNI L+LI+XR  K31-140 PU 140 160 14,5 15,5 6
628371 VNI L+LI+XR  K31-150 PU 150 160 14,5 14,5 4
628411 VNI L+LI+XR  K31-150/1 PU 150 170 14,5 15,5 6
628679 VNI L+LI+XR  K31-152 PU 152 171 15,87 17 6
6289369 VNI L+LI+XR  K31-160PU 160 175 14,5 15,5 5
62927345 VNI L+LI+XR  K31-170PU 170 185 14,5 15,5 5
6296295 VNI L+LI+XR  K31-180/1PU 180 195 14,5 15,5 5
6297033 VNI L+LI+XR  K31-180PU 180 205 18,2 19,5 7
6299368 VNI L+LI+XR  K31-185PU 185 205 18,5 19,5 6
6300185 VNI L+LI+XR  K31-190PU 190 205 14,5 15,5 5
6306925 VNI L+LI+XR  K31-210PU 210 230 14,5 15,5 5
630873 VNI L+LI+XR  K31-220 220 245 19 20 7
6311700 VNI L+LI+XR  K31-230 230 250 15 16 6
6313168 VNI L+LI+XR  K31-240/1PU 240 260 14,5 15,5 6
63131685 VNI L+LI+XR  K31-240 240 260 15 16,5 6
632098 VNI L+LI+XR  K31-290 290 315 19 20,5 7
6321417 VNI L+LI+XR  K31-295PU 295 315 16,4 18 6
632678 VNI L+LI+XR  K31-340 340 365 19 20,5 7
VOTA NR.  CODE    KASTAŞ NO d (f8) D(H11) b B(-0/+0,2) n

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Loading... please wait
# Vota code Name Application Material Pressure
(bar)		 Temperature °C Sliding Speed (m/s)
hydraulic-seals-rod-seal/vni-l-li-xr VNI/L+LI+XR VNI/L+LI+XR (U-RING SINGLE ACTION RODSEAL) ROD/AXLE PU-NBR-POM 600 -30°C +100°C 0.5
Find product

CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00

# Description Info Stock Price Add to cart
{{product.number}} {{product.description}} {{product.item_type_name.substring(0, 5)}} {{product.stock}} {{product.price|customCurrency:"€":",":".":2}}

Product types

img {{product_type.code}}