SO P8 is a single action wiper ensuring that foreign particles are not introduced into the hydraulic systems, avoiding wear and damage to all the internal components including seals.
Construction machinery, forklift-trucks, injection moulding machines, Agricultural machinery and standard cylinders.
Normally, this scraper can easily be assembled by deforming it for mounting. If using assembly tool the mounting area should not have any sharp edges. Before mounting the SO P8 must be lubricated with oil system.
NOTE: SO P8 wipers are single action and can be used with combination of all rod sealing elements. SO P8 wipers can be produced on request in FPM material for special applications that require high temperatures.
|MATERIAL: NBR 90 SH|
|MEDIA||Prepared , dried and de-oiled compressed air|
|SPEED||≤ 1.0 m/s|
Note: The above data are maximum values and cannot be used at the same time.
|Sliding Surface Ød||≤ 0.4 µm||≤ 3.2 µm|
|Groove Base ØD||≤ 1.6 µm||≤ 10 µm|
|Groove Flanks S1||≤ 3.2 µm||≤ 16|
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00