Hydraulic and Pneumatic Seals...since 1975
NISOP 10 is a double wiper, which ensures that no dirt can come out into the hydraulic system prevents damage to all components, including the sealing nations hold oil containment against.
PRODUCT ADVANTAGES
APPLICATION:
Construction machinery, forklift-trucks, injection moulding machines, agricultural machinery and standard cylinders.
INSTALLATION:
Generally, wiper can be easily fitted into the closed housing by deforming into a kidney shape.It is very important that the assemble tools must be of soft material and have no sharp edges. Before installation the wiper must be oiled with system oil.
NOTES: NISO P10 double wiper should be used in combination of suitable rod seals to avoid hydrodynamic pressure or pressure relieving bore between seal and wiper should be constructed to prevent the build up pressures (See section; Hydraulic Sealing Elements - Sample Designs). NISO P10 wipers can be produced on request in FKM material for special applications that require high temperatures.
| MATERIAL : NBR 90 SH |
| OPERATING CONDITIONS | |
|---|---|
| MEDIA | Prepared , dried and de-oiled compressed air |
| TEMPERATURE | -30ºC/+105ºC |
| SPEED | ≤ 0.5 m/s |
| PRESSURE | 10 Bar |
Note: The above data are maximum values and cannot be used at the same time
| SURFACE ROUGHNESS | Ra | Rmax |
| Sliding Surface Ød | ≤ 0.4 µm | ≤ 3.2 µm |
| Groove Base ØD | ≤ 1.6 µm | ≤ 10 µm |
| Groove Flanks S1 | ≤ 3.2 µm | ≤ 16 |
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
|
|||||||||||||||||||
|
|||||||||||||||||||
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00
|
|||||||||||
|
|||||||||||
