VNISO P10 is a double action wiper ensuring that foreign particles are not introduced into the hydraulic cylinders. The lip is designed in a particular way that it reliably wipes off the dirt but leaves a residual oil film on the rod.
PRODUCT ADVANTAGES
APPLICATION
Construction machinery , forklift-trucks , injection moulding machines , agricultural machinery and standard cylinders.
INSTALLATION
It can be assembled into closed groove without any tools. VNISO P10 does not need additional element such as circlip for axial fitting within the housing. We recommend using special assembly tool. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.
OPERATING CONDITIONS PU 92 SH | |||
---|---|---|---|
MEDIA | Mineral oil (DIN 51524) | HFA and HFB | HFC |
TEMPERATURE | -30ºC/+100ºC | +5ºC/+60ºC | -30ºC/+ 60ºC |
SPEED | ≤ 1.0 m/s | ≤ 1.0 m/s | ≤ 1.0 m/s |
PRESSURE | 16 Bar | 16 Bar | 16 Bar |
Note: The above data are maximum values and cannot be used at the same time
SURFACE ROUGHNESS | Ra | Rmax |
Sliding Surface Ød | ≤ 0.3 µm | ≤ 3.2 µm |
Groove Base ØD | ≤ 1.6 µm | ≤ 10 µm |
Groove Flanks S1 | ≤ 3 µm | ≤ 16 |
|
|||||||||||||||||||||||
|
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 20.00
|
|||||||||||
|