NMT is a three piece single acting chevron seal which consists of one thermoplastic header ring, one special formulated reinforced cotton fabric with nitrile rubber sealing element and one ptfe bach-up ring
High pressure cleaning equipment.
NMT 3 PCS SET chevron seal is used in open housing. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.
NOTES: Due to the special formulated reinforced cotton fabric with nitrile rubber service life is much longer than the normal cotton fabric seals.
|MATERIAL: COTTON FABRIC NBR -POM - PTFE|
Mineral oils (DIN 51524) water and water-oil mixture
Note: The above data are maximum values and cannot be used at the same time.
|Sliding Surface Ød||≤0.3 μm||≤4 μm|
|Groove Base ØD||≤1.5 μm||≤10 μm|
|Groove Flanks B||≤0.3 μm||≤4 μm|
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00