NISOP E8 (COMBI ROD WIPER PNEUMATIC)

product

NISOP E8 is a two piece double acting pneumatic rod seal-scraper which consists of one nitrile rubber sealing element and one polyester elastomer scrapper profile ring.

PRODUCT ADVANTAGES

  • Good scrapping with special geometry and material
  • High resistance to operating temperature changes
  • Superior sealing effect
  • Low static and dynamic friction values
  • Minimal space requirement

APPLICATION
Pneumatic cylinders.

INSTALLATION
It can be assembled into closed groove with tight hand force. NISOP does not need additional element such as circlip for axial fitting within the housing. We recommend using special assembly tool. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.

NOTES: For special applications that require high temperatures , NISOP can be produced in combination of FPM and PTFE material.

MATERIAL: TPE 5501 / NBR 80 SH

OPERATING CONDITIONS 
MEDIA Prepared , dried and de-oiled compressed air
TEMPERATURE -30°C +105 °C
SPEED ≤ 1.0 m/s
PRESSURE 16 Bar

 

Note: The above data are maximum values and cannot be used at the same time

SURFACE ROUGHNESS Rmax
Sliding Surface  Ød ≤ 4 µm
Groove Base ØD ≤ 10 µm
Groove Flanks  ≤ 15

Note: It is recommended to have 50% to 90% of the working surface material contact area value.

 

Loading... please wait
# Vota code Name Application Material Pressure
(bar)
Temperature °C Sliding Speed (m/s)
stang-afstrijker/nisop-e8-pneumatic NISOP E8 PNEUMATIC NISOP E8 (COMBI ROD WIPER PNEUMATIC) ROD/AXLE TPE-NBR 16 -30°C +105°C 1.0
Find product

CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00

# Description Info Stock Price Add to cart
{{product.number}} {{product.description}} {{product.item_type_name.substring(0, 5)}} {{product.stock}} {{product.price|customCurrency:"€":",":".":2}}