Products

COVERSEAL OP(a) IN/OUTSIODE

product

COVERSEAL OP(a) is a static in/outside sealing element designed to replace O-ring + back up ring combination.

PRODUCT ADVANTAGES:

  • High operating pressures
  • Interchangeable for o-ring and o-ring with back-up ring
  • Can work under severe conditions
  • No need for additional back-up ring
  • High wear resistant
  • No twisting on assembly

APPLICATION:

All hydraulic applications in which O-rings are used.

INSTALLATION:

COVERSEAL OP(a)  is assembled by hand. If using assembly tool the mounting area should not have any sharp edges. Before mounting the COVERSEAL must be lubricated with oil system.

NOTES: COVERSEAL OP(a) is a double acting cover seal for outer sealing. The diffculties faced during an o-ring assembly such as twisting , ripping was solved with this design.

MATERIAL: PU 93 SH

 

OPERATING CONDITIONS
MEDIA Mineral oils (DIN 51524)  HFA and HFB HFC
TEMPERATURE -30°C +80°C +5°C +50°C 30°C +40°C
PRESSURE ≤500 Bar ≤500 Bar ≤500 Bar

Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS Ra Rmax
Sliding Surface   ØD ≤0.8 µm ≤3.2 μm
Groove Base   Ød ≤1.6 µm ≤6.3 µm
Groove Flanks  B ≤6.3 µm ≤16 µm

Note: It is recommended to have 50% to 90% of the working surface material contact area value 

 

 

 

 

Loading... please wait
# Vota code Name Application Material Pressure
(bar)		 Temperature °C Sliding Speed (m/s)
coverseal-static/op-a OP(a) COVERSEAL OP(a) IN/OUTSIODE STATIC PU 93SH 500 -30°C +80°C
Find product

CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 20.00

# Description Info Stock Price Add to cart
{{product.number}} {{product.description}} {{product.item_type_name.substring(0, 5)}} {{product.stock}} {{product.price|customCurrency:"€":",":".":2}}

Product types

img {{product_type.code}}