DBM SIMCO 520 is a three piece double acting compact seal which consists of one fabric reinforced elastomeric sealing element and two thermoplastic guide back-up rings
PRODUCT ADVANTAGES:
APPLICATION:
Mining equipment , iron and steel industry , marine hydraulics and earth moving equipment.
INSTALLATION:
DBM SIMCO 520 profile has been designed to be installed in a closed or open grooves taking the indicated catalogue information into consideration. We recommend having open groove design for dimensions that are smaller than Ø 50mm. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil
NOTE: For special applications that require high temperatures , piston seal is manufactured in FPM and PTFE material.
PERMISSABLE SEALING GAP Smax (mm) | ||||
ØD | 250 Bar | 320 Bar | 400 Bar | 500 Bar |
≤80 mm | 0.60 | 0.55 | 0.45 | 0.35 |
>80 mm | 0.65 | 0.60 | 0.50 | 0.40 |
MATERIAL: POM / COTTON FABRIC NBR 80 SH |
OPERATING CONDITIONS | |||
MEDIA | Mineral oils(DIN 51524) | HFA and HFB | HFC |
TEMPERATURE | -30°C +105°C | +5°C +60°C | -30°C +60°C |
PRESSURE | ≤500 Bar | ≤500 Bar | ≤500 Bar |
SPEED | ≤0.5 m/sn | ≤0.5 m/sn | ≤0.5 m/sn |
Note: The above data are maximum values and cannot be used at the same time.
SURFACE ROUGHNESS | Ra | Rmax |
Sliding Surface ØD | ≤0.4 μm | ≤3.2 μm |
Groove Base Ød | ≤1.6 μm | ≤6.3 μm |
Groove Flanks B | ≤3.2 μm | ≤16 μm |
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
|
|||||||||||||||
|
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 20.00
|
|||||||||||
|