Hydraulic and Pneumatic Seals...since 1975
acSince the O-rings are low cost and simple sealing elements they have a wide application area in hydraulic and pneumatic systems. In case of providing suitable working conditions and equipments, they can be used both in static and dynamic applications. Because they occupy less space and provide two sided sealing compared with other sealing elements, O-rings enable easy designs. Having good results from O-ring applications is up to suitable measurements, choosing correct material, and proper surface quality of metal parts.
| STATIC SEALING |
If there is no permissible gap in static applications, for O-rings there is no certain pressure limit to resist against. But, it is required that tolerances should be chosen correctly and fixing screws should not create any gaps by extending in high pressures.
| STATIC PRESSURE | Hardness |
| P ≤160 Bar | 70 Shore A |
| P >160 Bar | 90 Shore A |
| DYNAMIC SEALING: |
They are used in low dynamic pressures and similar others like pneumatic cylinders or valve spool.
| DYNAMIC PRESSURE | Hardness |
| P ≤63 Bar | 70 Shore A |
| P >63 Bar | 90 Shore |
| SURFACE ROUGHNESS |
The other two most important factors in dynamic and static sealings are housing and the surface quality worked on.
For dynamic applications, a better surface quality is required compared with static ones.
| APPLICATION | Rmax. |
| Surface Piston | ≤4 μm |
| Surface Rod | ≤2 μm |
| DYNAMIC | Rmax |
| Groove base | ≤6 - 1.2 μm |
| Groove flanks | ≤25 μm |
| STATIC | Rmax. |
| Sliding surface | ≤10 μm |
| Groove base | ≤25 μm |
| RECOMMENDED CROSS SECTIONS IN DYNAMIC OPERATIONS | |
| d1 | d2 |
| > 9 | 1.78 |
| 8 > 19 | 2.4 and 2.62 |
| 18 > 40 | 3.00 and 3.53 |
| 37 > 130 | 5.33 and 5.7 |
| 110 > 150 | 6.99 |
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 20.00
|
|||||||||||
|
|||||||||||
