TS-DUO is a complete double-acting piston seal consisting of an aluminum plate with vulcanized nitrile rubber elastomer by means of a special production method.

PRODUCT ADVANTAGES:

• Ready to fit complete piston
• Reliable pressure application at the end of stroke by the venting passages
• Low friction and smooth running due to sealing lip geometry
• Easily fastened to the piston rod without using additional sealing elements
• Economical sealing solution

APPLICATION:

Geeignet für den Einsatz in Pneumatikzylindern.

INSTALLATION:

TS-DUO is pushed onto the piston rod on the clamping flange towards the rod and fixed by fastening. The nut has to be secured. The sliding surface and the cylinder bore should be oiled with oil that must not go into the reaction with the sealing element during the installation process.

NOTES: For special applications that require high temperatures , TS-DUO can be produced in FPM/ALUMINUM material.

Note: The above data are maximum values and cannot be used at the same time.

Note: It is recommended to have 50% to 90% of the working surface material contact area value.