NISG E9 is double-acting combination of groove and wiper ring cuff together consisting of vulcanized nbr rubber to steel.
NISG E9 wiper/seal is fitted into the housing by means of a circlip recess. The sealing part is pushed in and fixed by the circlip. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.
NOTES: For special applications that require high temperatures , NISG E9 can be produced in FPM material.
MATERIAL: STEEL / NBR 70 SH
|MEDIA||Prepared , Conditioned dry compressed air|
|TEMPERATURE||-30°C +105 °C|
|SPEED||≤ 1.0 m/s|
Note: The above data are maximum values and cannot be used at the same time
|Sliding Surface Ød||≤ 4 µm|
|Groove Base ØD2||≤ 10 µm|
|Groove Flanks S1||≤ 15|
Note: It is recommended to have 50% to 90% of the working surface material contact area value
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 10.00