VNISO EU is a double-acting pneumatic rod seal-scraper combination of polyurethane for use without additional snap ring.
PRODUCT ADVANTAGES:
APPLICATION:
Pneumatic cylinders.
INSTALLATION:
It can be assembled into closed groove with tight hand force. VNISO EU does not need additional element such as circlip for axial fitting within the housing. We recommend using special assembly tool. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.
MATERIAL: PU 92 SH |
OPERATING CONDITIONS | |
---|---|
MEDIA | Prepared , Conditioned dry compressed air |
TEMPERATURE | -30°C +80 °C |
SPEED | ≤ 1.0 m/s |
PRESSURE | 16 Bar |
Note: The above data are maximum values and cannot be used at the same time
SURFACE ROUGHNESS | Rmax |
Sliding Surface Ød | ≤ 4 µm |
Groove Base ØD | ≤ 10 µm |
Groove Flanks | ≤ 15 |
Note: It is recommended to have 50% to 90% of the working surface material contact area value
|
|||||||||||||||
|
CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 20.00
|
|||||||||||
|