Products

VS (V RING)

product

VS is a V-Ring designed to be used for rotating shaft applications.

PRODUCT ADVANTAGES

  • Easy fitting and requires little space
  • Functions even with poor surfaces
  • The one size of V-seal can be used for shafts of several different diameters
  • Low friction
  • Economical sealing solution

APPLICATION
Electric motors-limit switches , agricultural machinery , automotive engineering and special applications of rotating systems

INSTALLATION
Assembly of the v-ring is easy and does not require much time. The ring is expanded and pulled over the shaft. It is then brought into position with a rounded screw-driver or similar tool. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.

NOTES: For special applications that require high temperatures , V-rings VS can be produced in FPM material.

MATERIAL: NBR 70 SH

 

 
OPERATING CONDITIONS
MEDIA Water and Steam Greases
TEMPERATURE -5°C +105°C -30°C +105°C
PRESSURE  
0.3 Bar 0.3 Bar
PERIPHERAL SPEED ≤12.0 m/s ≤12.0 m/s

Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS Ra Rmax
Sliding Surface ≤0.8 μm ≤3 μm
Groove Base ≤1.8 μm ≤6.3 μm
Groove Flanks ≤5 μm ≤18 μm

Note: It is recommended to have 50% to 90% of the working surface material contact area value

 

Loading... please wait
# Vota code Name Application Material Pressure
(bar)		 Temperature °C Sliding Speed (m/s)
v-ring-type-vs-va-vl/vs VS VS (V RING) ROD/AXLE NBR 0.3 -30°C +105°C 12.0
EPDM 0.3 -30°C +105°C 12.0
FPM 0.3 -20°C +170°C 12.0
Find product

CB = Custom build (price on request)
* = Stock item
Stock = 0 (and not a Stock* or CB product) -> minimum item value € 20.00

# Description Info Stock Price Add to cart
{{product.number}} {{product.description}} {{product.item_type_name.substring(0, 5)}} {{product.stock}} {{product.price|customCurrency:"€":",":".":2}}

Product types

img {{product_type.code}}